Advertisement

Recent Games

Show more

123Bee Gym Escape

Advertisement
Gym Escape is another new point and click type room escape game by 123bee.com. You went to the gym to exercise, but unfortunately got trapped inside. You will have to find way out. Use objects found in the gym to escape. Good luck and have fun!

Play Gym Escape

Gym Escape Video Walkthrough

123Bee Gym Escape Walkthrough by Rosie:

1. Click on the rods on the floor and get the rod.
2. Look at the heavy bag in normal view and you will see towards the top right a black wire and a gold
wire that cross each other, click on the black wire towards the right of that. Then click on the end of
the black wire and it should take you to where there’s a switch, move switch to the bottom. Exit all
way.
3. Now that the treadmill is stopped, get the key.
4. Go right to the next screen and click on the cabinet.
5. Use the key to open the right side of the cabinet and get the cable and knife. Come back out.
6. While you’re here, click on the bike to zoom in, then click on the back of the bike towards the middle
and the bike should move forward, keep moving it until the vent is exposed. Come back out.
7. Now click towards the bottom left of the screen to get the circular saw.
8. Go left to the first screen (where the treadmill and heavy bag is at)and zoom in on the heavy bag, cut
the heavy bag with the knife. Get the key that inside the bag.
9. Go right and zoom in on the cabinet, and use the key on the left side to get the metal rod (half a
screwdriver).
10. Go left to the other screen and use the knife on the top corners of the poster. It should fall down
and reveal another switch. Go back.
11. Select the circular saw, now get the cable and place the cable towards the bottom of the saw. It
should connect together. Close out of that scene and zoom in toward the switch. Select the saw
and place it on the floor towards the treadmill, now click on the switch and then click on the
end of the cable and it should connect. Once connected move the switch again.
12. Now come back to normal view and click on the left mirror with bars on it. The view will change. Get
the saw and start cutting it will cut all around the edge and once you’re done, the bars will fall out.
13. Now get the dumbell rod in your inventory and break the glass until you see the orange handle. Get It.
14. Combine the medal rod and the handle to make a full screwdriver. Go right to the next screen, click
on the vent, take out the screws and you’re out.
Advertisement

Post Your Comment

126 Comments

  1. OK have half an hour, so let's do it!! hope this one from 123 is not buggy

    ReplyDelete
  2. heyy everyone!!!!!! new game

    ReplyDelete
  3. New game, key on treadmill is driving me nuts already, haha.

    ReplyDelete
  4. i have circle saw. thts it. anyone else find anything else??? tried to saw punching bag but didnt work

    ReplyDelete
  5. i think we need to fingure out how to stop the treadmill to get key

    ReplyDelete
  6. found a vent

    ReplyDelete
  7. You can move the bike to see vent. Found a dumbell bar between the others. Ball can be moved, nothing there, weight can be moved a little, nothing there either. We need the good old screwdriver I think.

    ReplyDelete
  8. julianne where did u find the dumbell??? n also u can pick the weights ll the way just drag them up but nothing underneath them

    ReplyDelete
  9. I have a saw and a dumbbell rod...

    ReplyDelete
  10. there are some iron bars lying around, one of them goes in your inventory

    ReplyDelete
  11. how did you move the bike?

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. I got the key. There is a power switch top right by heavy bag.

    ReplyDelete
  14. got rod. where's the vent??

    ReplyDelete
  15. thanks g8ball! You can move the bike by clicking the saddle

    ReplyDelete
  16. rent is behind bike. n thanks julianne

    ReplyDelete
  17. I had seen the cable, but didn't noticed the switch

    ReplyDelete
  18. used the knife on the bag...

    ReplyDelete
  19. got another key from the hevy bag

    ReplyDelete
  20. found other key

    ReplyDelete
  21. used key on left cabinet, combined cable with saw.

    ReplyDelete
  22. connected cable to saw

    ReplyDelete
  23. I feel stupid, can´t find the switch. Which view is it? The one of the heavy bag or the full on view?

    ReplyDelete
  24. found a metal rod... dunno what to do with it

    ReplyDelete
  25. full view. u have to click the line in the grey area.

    ReplyDelete
  26. its the view of the heavy bag. and i can't move the bike either!

    ReplyDelete
  27. julianne, top right, click near the cross point of cables, and then a little more to the right again.

    ReplyDelete
  28. oh yeah it is the full view. sorry

    ReplyDelete
  29. i cant see the switch to turn off the treadmill =/

    ReplyDelete
  30. I put the cable and the saw together, but I lost my peice of metal...

    ReplyDelete
  31. sorry, not the saddle, the back of the bike, beneath the saddle.

    ReplyDelete
  32. in the top right corner two cable cross each other click there and then at the end of the black cable

    ReplyDelete
  33. oh wait i foundd it

    ReplyDelete
  34. anyone find a screw driver????

    ReplyDelete
  35. need the other part of the screwdriver!!

    ReplyDelete
  36. have to go!! bye and good luck

    ReplyDelete
  37. take care Luly!! We appear to have half of the screwdriver, need the handle.

    ReplyDelete
  38. Hey guys, another switch behind the poster..cut with knife top crners..

    ReplyDelete
  39. were do u plug in the saw. maybe once we can plug in saw we can saw something n get the handle to screwdriver.

    ReplyDelete
  40. Yep, still looking for a place to plug in saw..

    ReplyDelete
  41. i can'y get the cable to go onto the saw, i've tried the wrench on the saw nothing is working

    ReplyDelete
  42. i can't get it to combine either

    ReplyDelete
  43. huh where did you cut the poster? can't get it to work..

    ReplyDelete
  44. click on the saw then drag the cable to the bottom of the saw.

    ReplyDelete
  45. good find vbranam, too bad the switch didn't do anything, though it might have changed the clock. We cannot plug the saw in, crap.

    ReplyDelete
  46. r u cutting the rite poster. its the first wen u saw wen u started the game. the the one above the weights

    ReplyDelete
  47. This comment has been removed by the author.

    ReplyDelete
  48. thanks about the saw! i just wasn't putting it at the right spot

    ReplyDelete
  49. you must put the saw on the floor then klick the plug I have done this but I can`t cut anything

    ReplyDelete
  50. it says metal rod, but it looks like wrench, sorry...it's in the cabinet

    ReplyDelete
  51. Thank you vbranam1! I was going nuts trying to find somewhere for the saw.

    ReplyDelete
  52. no problem. glad to help

    ReplyDelete
  53. i got the cable to go the saw, you click the bottom part of what looks like the handle

    ReplyDelete
  54. were do u plug in the saw????

    ReplyDelete
  55. Marijketje,the poster, with guy in blue on, beside the treadmill..cut both top corners. unsure what it does yet..

    ReplyDelete
  56. managed to cut fence but don't see any use in doing so

    ReplyDelete
  57. cut the fencing out, but there not much more I can do now

    ReplyDelete
  58. I'm out...Anyone need help?

    ReplyDelete
  59. where is the plug near the fence?

    ReplyDelete
  60. I have the handle but I can`t put the screwdriver together

    ReplyDelete
  61. cut the poster by th etreadmill with the knife
    plug in the saw, flip the switch

    ReplyDelete
  62. where do u plug in the saw in the fencing???

    ReplyDelete
  63. you don't need to put the screwdriver together...the hand IS the screwdriver ;-)

    ReplyDelete
  64. OUT! =)
    That was a good one. Not too hard, but still a challenge. =)

    ReplyDelete
  65. how do you attach the handle to the screwdriver?

    ReplyDelete
  66. the plug is behind the post, put the saw on the ground, switch, look at the fence, put the saw against the fence and saw away.
    Where did you find the handle?

    ReplyDelete
  67. K, Im out to..That was pretty fun..

    ReplyDelete
  68. How can I fixe the screwdriver?

    ReplyDelete
  69. break the mirror with the barbell

    ReplyDelete
  70. Once you cut the grate with the saw,,break the rest with the dunbell rod, het the handle..you know what to do then..lol

    ReplyDelete
  71. This comment has been removed by the author.

    ReplyDelete
  72. ania, the handle IS the screwdriver...no assembly required..

    ReplyDelete
  73. oohh okay thanks julianne

    ReplyDelete
  74. to put the screwdriver together, you just have to click in the right place. get the metal and attatch it to the handle, not the other way around. you just have to try it a few times.

    ReplyDelete
  75. I can`t unscrew the vent it doesn`t work. What am I doing wrong?

    ReplyDelete
  76. i cut the mirror then hit it with the dumbell rod, now have a screw driver handle

    ReplyDelete
  77. My fence dissapeared after I sawed it out, what do I need to break?

    ReplyDelete
  78. yep, thats what worked for me too embo, took a couple of tries, but eventually went together.

    ReplyDelete
  79. yihoo! I'm out. Thanks everyone!

    ReplyDelete
  80. hmmm...are you zoomed in on it? Click each screw

    ReplyDelete
  81. wow I`m out! Funny game! Thanks everyone!

    ReplyDelete
  82. julianne, the glass/mirror behind the grate..

    ReplyDelete
  83. really? maybe I missed something...mine was just together...I did'nt have to d oanything to it...weird.

    ReplyDelete
  84. got it! Finally a none buggy game :) Thanks all, good night!

    ReplyDelete
  85. you actually do have to assemble the screw driver. it just takes a few tries.

    ReplyDelete
  86. im still cnt find the plug to plug my saw in. help???

    ReplyDelete
  87. I´m not able to take the cable and I don´t find a handle! Please help!

    ReplyDelete
  88. i clicked all over. its ther a certain spot to click?? n in wat view. the full view or side view???

    ReplyDelete
  89. hi first time posting. after pluging in saw turn left and "open" lattice.

    ReplyDelete
  90. oops havent read all comments. has already been posted sorry

    ReplyDelete
  91. isygroxurworld, where we cut away the poster..Put the saw on the floor..then click the end of plug on saw, then click outlet on wall,then flip the switch, then cut the grate to the left of treadmill, then smash mirror and get handle..Assemble screwdriver,then unscrew the vent behind the stationary bike and your out..

    ReplyDelete
  92. mimi, the cable is in the right side of cabinet, along with the knife..The key from treadmill opens that right side cabinet...

    ReplyDelete
  93. I'm stuck already. Got a dumbbell rod, a saw. Can't get key from treadmill. Any hints please?

    ReplyDelete
  94. ruff,to the top right of heavy bag, see the cable..click until it zooms in, then follow cable to right, find the switch and turn it off..go get key from treadmill

    ReplyDelete
  95. vbranam1, thanks. Got key now.

    ReplyDelete
  96. You Welcome, I will still be on this blogger for a few, if you or anyone needs more help..

    ReplyDelete
  97. This comment has been removed by the author.

    ReplyDelete
  98. finsh thanks all fill geting key and stuff

    ReplyDelete
  99. Am I the only one who's saw will not cut the fence?

    ReplyDelete
  100. katie, once you put saw on the floor and plug it in,,go to the left for a zoomed in pic of grate, your saw will be there..Oh make sure you flip the switch to turn saw on after plugging in first.

    ReplyDelete
  101. I'm out. Vbranam1, thanks a lot for your help.

    ReplyDelete
  102. Your Welcome Ruff..see ya in the next one.

    ReplyDelete
  103. WALKTHROUGH!!!!

    This is my first walkthrough, I hope it helps.


    1. Click on the rods on the floor and get the rod.
    2. Look at the heavy bag in normal view and you will see towards the top right a black wire and a gold
    wire that cross each other, click on the black wire towards the right of that. Then click on the end of
    the black wire and it should take you to where there’s a switch, move switch to the bottom. Exit all
    way.
    3. Now that the treadmill is stopped, get the key.
    4. Go right to the next screen and click on the cabinet.
    5. Use the key to open the right side of the cabinet and get the cable and knife. Come back out.
    6. While you’re here, click on the bike to zoom in, then click on the back of the bike towards the middle
    and the bike should move forward, keep moving it until the vent is exposed. Come back out.
    7. Now click towards the bottom left of the screen to get the circular saw.
    8. Go left to the first screen (where the treadmill and heavy bag is at)and zoom in on the heavy bag, cut
    the heavy bag with the knife. Get the key that inside the bag.
    9. Go right and zoom in on the cabinet, and use the key on the left side to get the metal rod (half a
    screwdriver).
    10. Go left to the other screen and use the knife on the top corners of the poster. It should fall down
    and reveal another switch. Go back.
    11. Select the circular saw, now get the cable and place the cable towards the bottom of the saw. It
    should connect together. Close out of that scene and zoom in toward the switch. Select the saw
    and place it on the floor towards the treadmill, now click on the switch and then click on the
    end of the cable and it should connect. Once connected move the switch again.
    12. Now come back to normal view and click on the left mirror with bars on it. The view will change. Get
    the saw and start cutting it will cut all around the edge and once you’re done, the bars will fall out.
    13. Now get the dumbell rod in your inventory and break the glass until you see the orange handle. Get It.
    14. Combine the medal rod and the handle to make a full screwdriver. Go right to the next screen, click
    on the vent, take out the screws and you’re out.

    ReplyDelete
  104. You done a great job Rosie...

    ReplyDelete
  105. YES THX Rosie
    Because game is bugged. I lost my metal rod and it came out after the mirror complete with handle but I couldn't move the bike anymore. Restart and all went good.I lost the metal rod on the bike or on the bars.

    ReplyDelete
  106. hey that was the first good 123bee.com game.

    ReplyDelete
  107. Nice game, I'm out. Thanks Rosie for WALKTHROUGH!!!!

    ReplyDelete
  108. stupid ass game with annoying sound effects.

    ReplyDelete
  109. y isnt my saw working how do i cut da metal???

    ReplyDelete
  110. chyanne, use the saw on the four corners of the fencing.

    top-click until you see sparks and leave it there for a second.

    bottom-do same

    right side-do same

    left side-do same

    ReplyDelete
  111. Hurray ! I made it :D ... gr8 walkthrough Rosie

    ReplyDelete
  112. I have switched the saw-plug switch every which way, followed all the different advice, and the stupid thing still won't work! Can I get the receipt, drive back to Lowe's, and exchange it for one that does?

    ReplyDelete

You can post your comments to share your opinion about games, share your hints to help other players or ask help from them. If you can't sign in with your Google account, while you try to post your comment, you have to allow cookies on your browser for this website to sign in.
You can also check recent comments to help other players, if they need help about games.

Emoji
(y)
:)
:(
hihi
:-)
:D
=D
:-d
;(
;-(
@-)
:P
:o
:>)
(o)
:p
(p)
:-s
(m)
8-)
:-t
:-b
b-(
:-#
=p~
x-)
(k)

Advertisement

Close Menu